- How to use fuel level sensors with GPS tracking system in vehicles
How to use fuel level sensors with GPS tracking system in vehicles1. First install the fuel level sensor into the fuel tank. Tools for the installation: 1.1 Installation process.
1.2) PlaceBetter to fix this sensor in the middle of the tank. In this way, it will avoid the original floater in the tank.1.3) Clear the surface of the tank; Clear the position you are going to fix this sensor.1.4) Drill the tankDrill a while in the middle of the tank. (Please slow the drill speed when the driller is going to drill through the metal plate of the tank, then use the screwdriver Sharp-nose pliers to take the metal plate of the tank out)Note: Please empty the tank before you drill the tank.
1.5) clear the tank; Take out the scrap iron in the tank by magnet with a rope.1.6) install the sensor Put the gasket under the tank and drill the hole for the screw.
2. connect the fuel sensor to the GPS tracker:For AT03, Connect the red cable of the sensor to the positive power of the GPS tracking device, and black cable to the ground, white cable to green cable of PIN 10. For AT06+, Connect the red cable of the sensor to the positive power of the GPS tracking device, and black cable to the ground, white cable to the green cable of PIN 3 or PIN 4.The fuel level data is shown in the server below:
- How to use fuel level sensors with GPS tracking system in vehicles
